Davies Craig 150EWP

Print
This is a very good budget friendly pump that has proven to be extremely reliable and offer decent flow rates when used in conjunction with one of our flow mods.
Sales price $220.00
Description

We have been using the DC150 in our kits over the past 3 years.  This is a very good budget friendly pump that has proven to be extremely reliable and offer decent flow rates when used in conjunction with one of our flow mods.  While not on the performance level of the WP32, users can expect to see 8.5-9gpm and the pump has a 7,000hr service interval.

Voltage 12 Volt Pump
Operating voltage 3V DC to 15V DC
Maximum current 10A @ 13V
Flow rate (max) 150 L/min (39.63 US gal/min) @ 13V DC
Operating temp. -40° to 130°C  (-40° to 266°F)
Pump design Clockwise centrifugal with volute chamber
Pump weight 1,170 grams (2.6 lb)
Pump material Aluminium (Powder Coated)
Burst pressure 500 kPa (72.5 psi)
Seal Ceramic face seal
Fits hose sizes 35mm to 51mm (1⅜” to 2”) Inlet & Outlet -16AN (12)
Push-On fitting Size EWP Inlet & Outlet 38mm

 

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm