Crusher inlet for large intake upgrade
This is the Whipple crusher inlet that is HUGE in size and sought after as an upgraded cold air intake upgrade. It includes everything in front of the throttle body. The very large conical air filter, 123 mm slot MAF housing, silicon couplers and hose clamps as well as the plastic intake tube.
Please note when installing on a VMP TVS blower a different silicon coupler will be needed at the throttle body because the angle is different. A 5" ID silicon coupler of approximately 60 degrees. An example picture of it installed on a TVS car is shown.
Note this does not include the crusher inlet piece that bolts to the back of the blower. This is just the cold air part in front of the throttle body.